Skip to the page
Austin's Homestead

Growing, raising and putting up food on Colorado's Front Range

Land

Wells and Well Permits in Colorado

How the state issues permits for small household and domestic wells, what each kind allows, and the steps from application to a working well.

Difficulty
Involved
Time
Weeks to months
Cost
$15,000–$45,000+ for a new well
Season
Apply in winter; drill spring to fall

Why every well needs a permit

In Colorado, groundwater is usually part of the same water system as rivers and streams, and it falls under the state's prior-appropriation rules. Pumping a well can reduce water available to senior right holders, so the state controls who may drill and what the water may be used for. The Division of Water Resources, part of the Department of Natural Resources and led by the State Engineer, issues well permits. Drilling without one, or using a well beyond what its permit allows, can lead to enforcement.

Exempt wells for homes and small homesteads

Most homestead wells are permitted as exempt wells. They do not need a water court decree, but their uses are strictly limited. As these permits are commonly described:

  • Household use only. Water may be used for ordinary purposes inside one single-family home. Outdoor watering, including gardens and lawns, is generally not allowed. These permits are common on smaller lots in subdivisions.
  • Domestic wells on larger parcels. On parcels of 35 acres or more, and on some older lots, a permit may allow use in up to three single-family homes, irrigation of up to about one acre of garden and lawn, and watering of domestic animals and livestock, at a limited pumping rate.
  • Livestock wells. Wells for watering livestock on rangeland may be permitted separately.

The exact terms of any permit are printed on it, and the rules have exceptions for designated basins and certain aquifers. Always read the permit itself and confirm with the Division of Water Resources. The page on Colorado water rights gives more background.

From application to working well

  1. Confirm the parcel's acreage, legal status and the aquifer that lies beneath it.
  2. Look up any existing permits for the property in the state's public records.
  3. Submit the appropriate well permit application to the Division of Water Resources with the required fee and documents.
  4. Wait for the permit to be approved, and read its conditions carefully.
  5. Hire a licensed well construction contractor to drill and complete the well within the permit's time limit.
  6. Have a licensed pump installer set the pump, pressure tank and controls.
  7. Make sure the required construction and pump installation reports are filed with the state.
  8. Test the water at a certified lab before drinking it.

Costs and what drives them

Well costs on the Front Range vary mainly with depth and geology. Shallow wells near streams may be a few dozen feet deep, while wells into deeper bedrock aquifers can run many hundreds of feet. Drilling, casing, pump, pressure tank, wiring and the line to the house add up. A complete new well often costs from about $15,000 to more than $40,000. Get written estimates from more than one licensed contractor, and ask neighbors about the depth and yield of their wells.

Water quality and testing

Private well owners are responsible for their own water quality. Test a new well before use, then at least once a year for bacteria and nitrates, and every few years for a broader panel that can include minerals, uranium, arsenic, fluoride and hardness, which occur naturally in some Front Range aquifers. Use a certified lab, and match any treatment to the results rather than guessing.

Caring for a well

Keep the casing at least a foot above the ground, with a tight, vermin-proof cap. Slope soil away from the wellhead and keep manure, chemicals and fuel well away. Protect pressure tanks and exposed lines from freezing; see livestock water in winter for hydrant and heater ideas. Keep a file of the permit, construction report and test results, because they matter when you sell the property or need repairs. If you buy land with an existing well, a pump and flow test and a water test are worth the cost; see buying rural land.

When it goes wrong
ProblemLikely causeFix
Permit allows household use onlyLot size, subdivision date or basin rules limit outdoor usePlan the garden around rain barrels, another water source or a smaller footprint
Well yield is lower than expectedLocal aquifer conditions vary over short distancesAdd a storage tank and pump on a timer to stretch a low-yield well
Water tastes or smells offMinerals, bacteria or sulfur in the aquiferTest at a certified lab and match treatment to the results

Reviewed November 2026.

Read next

  • Land
    Colorado Water Rights Explained

    How Colorado's prior-appropriation system works, why owning land does not mean owning its water, and what that means for a small homestead.

  • Start
    Buying Rural Land in Colorado

    The questions to answer before you buy a rural parcel, with water, zoning and access at the top of the list.

  • Animals
    Livestock Water in Winter

    Animals need water every day of winter, and on the Front Range keeping it unfrozen is the single most important cold-weather chore.